Roland V-Drums TD-20X, Owner'S Manual

Page: 56 / 156

56
Chapter 3. Mixer Settings
For each drum kit, settings such as the volume and pan
(stereo position) of each pad can be stored together.
Settings such as volume and pan are made in the “mixer.”
Here’s how to set the volume or pan (position in sound field)
on an individual pad basis.
1.
Press the [MIXER] button.
The [MIXER] button lights.
fig.03-001-mixer-vol.eps_70
2.
Use the [F1]–[F4] buttons to select the parameter.
3.
Select the pad that you want to edit.
Strike the pad, or use the TRIG SELECT buttons to select it.
You can also use the [CURSOR (left/right)] buttons to select a
pad.
4.
Use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons to make the setting.
Pressing the [F5 (H & R)] ( ) button in the
[F1 (VOLUME)], [F2 (PAN)], or [F3 (MIN VOL)] setting
screen, you can choose to set the head and rim
simultaneously or individually.
5.
Press the [EXIT] button to return to the “DRUM KIT”
screen.
Normally, the GROUP FADERS are used to adjust the volume
balance of the TD-20X’s output. However, you can also use
these faders temporarily to edit the drum kit’s mixer settings.
This state is called “MIX EDIT.”
1.
Press the [MIXER] and [FADER] buttons
simultaneously.
The [MIXER] button lights, and the [FADER] button flashes.
The upper indicator of the sliders will be lit (p. 30). (You can’t
make the lower indicator light.)
fig.03-005-mix-edit-vol.eps_70
2.
Press the [F1]–[F3] buttons to select the parameter.
3.
Move the fader which corresponds to the pad you
wish to adjust.
You can also use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons.
These settings are always common to the head and rim.
Setting the Volume and Pan of
Each Pad [MIXER]
Parameter Value Description
[F1 (VOLUME)] button
VOLUME 0–127 Volume of each pad
[F2 (PAN)] button
PAN L15–CTR–R15 Pan of each pad
[F3 (MIN VOL)] button
MINIMUM
VOLUME
0–15
Minimum volume of each pad
This allows you to increase
the volume of the weakest
strike while maintaining the
volume of the strongest
strike. You can use this to
make a snare’s “ghost notes”
or cymbal legato strikes
more easily audible.
[F4 (KIT VOL)] button
Kit Volume 0–127 Volume of the entire drum kit
Pedal HH
Volume
0–127
Volume of the hi-hat’s foot
closed sound
XStick Volume 0–127 Volume of cross stick sound
Editing with the Group Faders (MIX EDIT)
Parameter Value Description
[F1 (VOLUME)] button
VOLUME 0–127 Volume of each pad
[F2 (MIN VOL)] button
MINIMUM
VOLUME
0–15
Minimum volume of each
pad
[F3 (AMB SND)] button
AMB SEND
LEVEL
0–127
Send level to the ambience
for each pad
[F4 (MFX SND)] button
MFX SEND
LEVEL
0–127
Send level to the multi-
effects for each pad
TD-20X_e.book 56 ページ ２００９年６月８日 月曜日 午後３時５０分