manualshive.com logo in svg

Roland V-Drums TD-20X, Owner'S Manual

Share
Download
Roland V-Drums TD-20X Owner'S Manual Download Page 32

 

32

 

Overview

 

The available performance techniques will depend on 

the trigger input. Positional sensing will also depend on 

the trigger input. 

For details on the performance techniques and striking 

points supported by each trigger input, refer to “Trigger 

Inputs and Playing Methods Corresponding Chart” (p. 

97).

 

About the instruments corresponding to each playing 

method, refer to “Drum Instrument List” (p. 131).

 

fig.Play-Head.e

 

Head shot

 

Hit only the head of the pad. 

With certain snare sounds, 

playing position will change 

the nuance of the sound.

 

fig.Play-Rim.e

 

Rim shot

 

Strike the head and the rim 

of the pad simultaneously.

 

fig.Play-Cross.e

 

Cross stick

 

Only strike the rim of the 

pad.

Depending on the 

instrument assigned to the 

rim you can play rim shots 

and/or cross stick sounds.

 

To play the cross stick, be sure that you only strike the 

rim of the pad. Placing your hand on the head of the 

pad might prevent the cross stick sound from being 

played properly.

 

Change the nuance of the rim shot

 

With certain snare and tom sounds, slight changes in the way 

you play rim shots changes the nuance.

 

fig.Play-Rim.e

 

Normal rim shot 
(Open rim shot)

 

Strike the head and rim 

simultaneously.

 

fig.Play-Shallow.e

 

Shallow rim shot

 

Simultaneously strike the 

head near the rim and the 

rim itself.

 

Playing with brushes

 

With the TD-20X, you can “swish” or “sweep” using brushes 

with the PD-125XS, 4PD-125X, or PD-105X connected to 

TRIGGER INPUT 2 (SNARE).

When playing with brushes, turn the Brush Switch to “ON” (p. 

40).

 

Use ONLY nylon brushes.

 

Playing Methods

 

Pad (PD-125XS/125X/105X)

Head

Head

Rim

Rim

Do not place your hand
on the head

Head

Rim

Head

Rim

TD-20X_e.book 32 ページ ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands