Roland V-Drums TD-20X Owner'S Manual Download

Page: 72 / 156

Chapter 5. Playing Patterns—Sequencer

Here’s how to select the instruments to be used by backing

parts (parts other than the drum and percussion parts), and

make settings for the Key Shift (change pitch in semitone

steps).

In the “PATTERN PART” screen (p. 71), press the [F2

(BACKING)] button.

The “MELODY (BASS, BACKING 1, BACKING 2)PART” screen

appears.

fig.05-010-part1.eps_70

Press the [F1]–[F4] buttons to select the part you

wish to set.

Use the [CURSOR (up/down)] buttons to select the

parameter.

Use the [-] [+] buttons or the [VALUE] dial to make

settings.

Press the [EXIT] button to return to the “PATTERN

PART” screen.

Here you can adjust the overall tuning for the backing parts.

In the “PATTERN PART” screen (p. 71), press the [F2

(BACKING)] button.

Press the [F5 (M TUNE)] button.

The “MASTER TUNE” screen appears.

fig.05-012-tune.eps_70

Use the [-] [+] buttons or the [VALUE] dial to make

setting.

You can set this to 440.0 Hz by pressing the [F5 (440 Hz)]

button.

Press the [EXIT] button twice to return to the

“PATTERN PART” screen.

Specifying the Instruments for the
Backing Parts [F2 (BACKING)]

Function button

[F1]

Melody Part

[F2]

Bass Part

[F3]

Backing 1 Part

[F4]

Backing 2 Part

Parameter

Value

Description

Inst

Refer to
“Backing
Instrument
List” (p. 138)

Part Instrument

Key Shift

-24–0– +24

Shifts the overall pitch (in
semitone steps).

Bend
Range

0– +24

Amount of change in pitch
with pitch bend at the
maximum level (in semitone
steps).

Tuning Settings for the Backing Parts
(Master Tuning)

Parameter

Value

Master Tune

415.3–466.2Hz

Instrument Numbers/Instrument Names

You can change the tone by changing the instrument

number. Selecting different variations within each

instrument number changes the instrument name, with

a different tone being selected.

Instrument numbers correspond to the program

numbers (1-128).

Variation Tones

These are slightly varied tone types found in an

instrument number. The number of variation tones

varies with the instrument number.

fig.05-011-part1-vari.eps_70

Number of
variation tones

Instrument name

TD-20X_e.book 72 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands