manualshive.com logo in svg

Roland V-Drums TD-20X, Owner'S Manual

Share
Download
Roland V-Drums TD-20X Owner'S Manual Download Page 116

 

116

 

Chapter 10. MIDI Settings

 

1.

 

Press the [SETUP] button.

 

The [SETUP] button lights, and the “SETUP” screen appears.

 

2.

 

Press the [F1 (MIDI)] button.

 

3.

 

Press the [F2 (GLOBAL)] button.

 

The “MIDI GLOBAL” screen appears.

 

fig.10-002-midi-global.eps_70

 

4.

 

Use the [CURSOR (up/down)] buttons to select the 

parameter.

 

5.

 

Use the [-] [+] buttons or the [VALUE] dial to make 

settings.

 

6.

 

Press the [EXIT] button twice to return to the 

“DRUM KIT” screen.

 

This section explains how you can use the Roland SPD-20 (a 

MIDI controller) together with the TD-20X’s pads to play 

internal sounds and an external sound module.

When “Soft Thru” is set to “ON,” the messages received at 

MIDI IN will also be transmitted from the MIDI OUT/THRU 

connector.

 

fig.SoftThru.e

 

MIDI Channel Settings for the 
Entire TD-20X [F2 (GLOBAL)]

 

Parameter

Value

Description

Soft Thru

 

OFF, ON

Soft Through on/off 

 

Local 
Control

 

OFF, 
ON (DRUM), 
ON (PERC)

Local Switch on/off (p. 117)

 

Device ID

 

1–32

Device ID setting (p. 117)

 

V-LINK 
MIDI Ch

 

CH1–CH16

V-LINK transmit channel (p. 118)

 

V-LINK 
Device ID

 

1–32, 128

V-LINK device ID (p. 118)

 

Playing an External MIDI Sound 
Module from Another MIDI Controller 
(Soft Through)

MIDI IN

MIDI

OUT/THRU

MIDI OUT

SPD-20

Pad or pedal

TRIGGER

INPUT

To the MIDI IN of another
sound module or sampler

TD-20X

TD-20X_e.book 116 ページ ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands