69
Chapter 5. Playing Patterns—Sequencer
The TD-20X’s sequencer organizes music into six “parts.” The
Drum Kit part is used to record/play back what is played on
the pads. Additionally, Melody Part, Bass Part, Backing 1 Part,
and Backing 2 Part are the four backing instrument parts, and
there is another Percussion part.
The collective performance of these six parts is called a “pattern.”
Preset Patterns (Pattern P 1–150)
Settings in Preset patterns cannot be modified. These
patterns are provided for use in practicing or live
performances. You cannot erase nor make changes in the
performance data of a Preset pattern. Recording to them is
also not allowed.
User Patterns (Pattern U 151–250)
These are patterns for you to use as you wish. You can record
directly from the pads or an external MIDI keyboard in real
time (p. 83). User pattern settings are saved automatically.
Using Preset Patterns
As you cannot record over a preset pattern, the following
appears in the display if you press the [REC] button.
fig.05-001-error-preset.eps_70
If you want to change, edit, or record any Preset pattern
settings, copy them to a User pattern (p. 86).
fig.06-001
The [CURSOR] buttons cannot be used while the pattern
is played back.
About Preset Pattern Copyright
The sounds, phrases and patterns contained in this
product are sound recordings protected by copyright.
Roland hereby grants to purchasers of this product the
permission to utilize the sound recordings contained in
this product for the creation and recording of original
musical works; provided however, the sound recordings
contained in this product may not be sampled,
downloaded or otherwise re-recorded, in whole or in
part, for any other purpose, including but not limited to
the transmission of all or any part of the sound
recordings via the internet or other digital or analog
means of transmission, and/or the manufacture, for sale
or otherwise, of any collection of sampled sounds,
phrases or patterns, on CD-ROM or equivalent means.
The sound recordings contained in this product are the
original works of Roland Corporation. Roland is not
responsible for the use of the sound recordings contained
in this product, and assumes no liability for any
infringement of any copyright of any third party arising out
of use of the sounds, phrases and patterns in this product.
Basic Operation
Button
Description
[PATTERN]
Selects patterns. This displays the basic
screen for the sequencer.
[STOP]
Stops playback of the pattern. When
pressed while the pattern is stopped, this
returns you to the beginning of the
pattern.
[PLAY]
Starts playback of the pattern.
[REC]
Enters record-standby mode.
[TEMPO]
[CURSOR (up)]
When pressed while the pattern is stopped,
this returns you to the beginning of the
pattern.
[CURSOR (left)]
When pressed while the pattern is stopped,
this returns you to the previous measure in
the pattern.
[CURSOR (right)]
When pressed while the pattern is stopped,
this advances you to the next measure in
the pattern.
[CURSOR (down)]
When pressed while the pattern is stopped,
this advances you to the end of the pattern.
TD-20X_e.book 69 ページ 2009年6月8日 月曜日 午後3時50分
Summary of Contents for V-Drums TD-20X
