Roland V-Drums TD-20X Owner'S Manual Download

Page: 46 / 156

Chapter 2. Instrument Settings [INST]

Here’s how to select and edit sounds, such as the snare drum

and kick drum.

There are two basic ways to select the sound you want to

edit.

Choose by hitting a pad

Press the [INST] button.

The [INST] button lights, and the “INST” screen appears.

fig.02-001-inst.eps_70

Strike a pad.

The settings screen for the struck pad appears.

To select a pad’s rim, strike the rim.

Choose with the trigger select buttons

Press the [INST] button.

The [INST] button lights, and the “INST” screen appears.

Press the TRIG SELECT [1] or [15] button to select

the pad (the trigger input number).

The trigger input number is indicated in the upper part of the

screen.

Press the TRIG SELECT [RIM] button to select the

head or rim.

Head:

The [RIM] button is unlit.

Rim:

The [RIM] button is lit.

fig.02-002-inst.eps_70

When MIDI note number corresponding to a pad is

received, the pad is selected and shown in the screen

(p. 53).

When editing instruments, you can prevent the screen from

being switched inadvertently even if you hit another pad.

Select the pad to be locked.

The settings screen for the pad appears.

Press the TRIG SELECT [LOCK] button to make it

light.

The pad is locked and other pads cannot be selected.

To release the lock, press the [LOCK] button to

make it go off.

You can change the pad to be locked by pressing the

TRIG SELECT [1] or [15] button even if the [LOCK] button

is lit.

All the TD-20X sounds are referred to as “instruments (INST).”

You can choose an instrument from the TD-20 instruments or

the TDW-20 instruments. In this case, choose TD-20

instruments from “INT” and TDW-20 instruments from “EXP.”

Press the [INST] button.

The [INST] button lights, and the “INST” screen appears.

fig.02-003-inst.eps_70

• For the “EXP” instrument group, an “EXP” icon is shown

before the name.

• The “V-EDIT” icon is shown in edit screens that allow V-EDIT

(p. 48).

Choosing a Pad to Edit

Lock the Pad You are Editing
(EDIT LOCK)

Assign an Instrument to a Pad

Group

Type of instrument

Inst

Name of instrument

TD-20X_e.book 46 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands