Roland V-Drums TD-20X Owner'S Manual Download

Page: 41 / 156

Chapter 1. Drum Kit Settings [KIT]

You can view the volume that is being output from the

MASTER OUT, PHONES, or DIRECT OUT jacks.

Use the [-] [+] buttons or the [VALUE] dial to choose the jacks.

fig.01-010-mon.eps_70

You can rename the currently selected kit; the maximum is 12

characters.

Press the [KIT] button.

The “DRUM KIT” screen appears.

Press the [F3 (NAME)] button.

The “DRUM KIT NAME” screen appears.

fig.01-011-name.eps_70

Use the [CURSOR (left/right)] buttons to move the

cursor to the character to be changed.

Use the [VALUE] dial, the [-] [+], or [CURSOR (up/

down)] buttons to change the character.

Press the [EXIT] button to return to the previous

screen.

For each kit, you can specify whether cross-stick techniques

can be used.

Press the [KIT] button.

The “DRUM KIT” screen appears.

Press the [F5 (XSTICK)] button.

Each time you press the button, cross-stick will alternate

between enabled and disabled.

• Cross stick can be played

fig.01-012-xstick-on.eps_70

• Cross stick not possible

fig.01-013-xstick-off.eps_70

When using the cross-stick technique, you can specify

the velocity at which the cross-stick sound will be

switched with the open rim shot sound. If this “XStick

Thrshld” setting is set to “127,” only the cross-stick

sound will play every time. For more about making this

setting, refer to “Detailed Settings for Rim Shots [F2

(RIM)]” (p. 104).

Viewing the Output Level (OUPUT
MONITOR) [F5 (MONITOR)]

Naming a Drum Kit [F3 (NAME)]

Function button

[F1 (INSERT)]

A blank space is inserted at the cursor position,
and characters after this point are moved to the
right one space.

[F2 (DELETE)]

Character at the cursor position is deleted, and
characters after this point are moved to the left
one space.

[F3 (SPACE)]

Character at the cursor position is replaced by
a blank space.

[F4 (CHAR)]

Type of character at the cursor position
changes between uppercase/lowercase
alphabet, or numbers and symbols.

Playing Cross Stick [F5 (XSTICK)]

TD-20X_e.book 41 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands