RoHS Compliant START-S12-M, Instruction And Warnings For The Installer

Page: 91 / 177

START-S12 Technical manual
-26-
Group functions “T”
SET
UP DESCRIPTION
VALUES
ACCEPTED
STANDARD
- seconds -
MEMO
T 01 Complete opening cycle time step from 0,1 s 4,0
T 02 Partial opening time step from 0,1 s 3,0
T 03 Set up deceleration by opening step from 0,1 s 2,0
T 04 Set up deceleration by closing step from 0,1 s 1,0
T 05 Pause time for START or OPEN step from 0,5 s from 2 to 127.5 s 2,0
T 06 Pause time for PARTIAL OPENING step from 0,5 s from 2 to 127.5 s 5,0
T 07 PRE-LIGHTING time by opening step from 0,5 s from 2 to 127 s 0,5
T 08 PRE-LIGHTING time by closing step from 0,5 s from 2 to 127 s 2,0
T 09 (Not used)
T 10
Time to research of the limit switch step from 0,1 s 5,0
T 11
Stop the detection of input of the photo-beam.
Not considered if S03 is set 1
step from 0,1 s 0,5
T 12 Time to stp to detecte the SAFETY EDEGE INPUT
(terminal board. 16)
step from 0,5 s 1,0
T 13
Time block the check of the absorption of the motor
when the gate is opening or closing
step from 0,1 s from 0 to 2 s 0,2
T 14 Pause time of reverse of the direction of the motor step from 0,1 s from 0 to 2 s 0,1
T 15 STOP of the motor after detecting the LSO step from 0,1 s from 0 to 3 s 0 s
T 16
Time of delay of the motor when detecting the LSC step from 0,1 s from 0 to 3 s 0 s
Group functions “L”
SET
UP DESCRIPTION
VALUES
ACCEPTED
STANDARD
- seconds -
MEMO
L 01 Minimum opening speed from 1 to 200 30
L 02 Minimum closing speed from 1 to 200 20
L 03 Maximum opening speed from 1 to 200 80
L 04 Maximum closing speed from 1 to 200 40
L 05 Opening acceleration from 1 a 99 8
L 06 Closing acceleration from 1 a 99 8
L 07 Opening deceleration from 0 to 25 8
L 08 Closing deceleration from 0 to 25 8
L 09 Maximum absorption of the motor to STOP the door
in Ampere
from 0,5 to 15,5
5,0
L 10 Maximum absorption of the motor in case of trouble
in Ampere
from 0,5 to 15,5
7,0
L 11 Power of the output BRAKE from 0 to 70 50
8 LIST of the FUNCTIONS