RoHS Compliant START-S12-M, Instruction And Warnings For The Installer

Page: 46 / 177

START-S12-M Technical manual
-13-
In case the antenna is only a cable of 17cm for 433.92Mhz,
connect it to the terminal board no. 23.
3.4 Connection of the ANTENNA
3.5 STOP connection
Button: Stop until a new command
Switch: it keep the automation stopped until a new
command
The connection of the safety devices is prevued
with a button or a normally closed contact
More devices should be connected in parallel.
S 15
STOP
1 - Activated
0 - Deactivated
12 13 14 15 16 17 18 19 20 21 22 23
20 21 22 23
S 22
SAfETY EDgE
1 - Activated
(Standard)
0 - Deactivated
SAfETY EDgE contact
0 - NC contact
1 - 8K2 contact
(Standard)
S 38
Connect the safety edge at terminal board no. 20 and 21
3.6 Connection of the 8k2 safety edge or N.C. contact
12 13 14 15 16 17 18 19 20 21 22 23
The picture shows the connection of both limit switches but you can connect it separately. You can use only
lSO or only lSC.
3.7 Connection of the Open and Close limit switch
S 13
S 14
LSO
1 - Activated
0 - Deactivated
LSC
1 - Activated
0 - Deactivated
If the input LSO & LSC
is not used, set S13 & S14 in 0
!
12 13 14 15 16 17 18 19 20 21 22 23
OPEN
N.C.
ClOSE
N.C.
LImIT
SWITChES