RoHS Compliant START-S12-M, Instruction And Warnings For The Installer

Page: 77 / 177

START-S12 Technical manual
-12-
3 Installation of the control unit
• The control unit is
equipped with a net-
work fi lter
We recommend:
• Install an automatic
switch 10/16A
• Check the network
power: 230 Vac:
-5% +10%
THREE PHASE MOTOR
“DELTA” CONNECTION
M
MF1 MF2
MF3
It is recommended to use
shielded cables
3.1 Connection of the TENSION and MOTOR POWER SUPPLY
It is shown the connection of a 230V lamp with or
without fl ashing card.
To activate the function lamp in pause TIME, set
S05
as shown:
S 05
LAMP IN PAUSE
1 - Activated
0 - Deactivated (standard)
• SET UP OF THE LIGHTING
S12
In case the lamp has no fl ashing card, set S12 in 1:
FLASHING
1 - Activated (standard)
0 - Deactivated
• LAMP IN PAUSE TIME
3.2 Connection of the lamp 230 Vac or 12 Vac
N L
230 Vac
LAMP
12 V ac
LAMP
230 V ac
It is shown the connection of a 12 Vac lamp with or
without fl ashing card.
3.3 Pre-fl ashing time
It is possible to increase or reduce the time of pre-fl ashing
when the door is closed or open, make as follow with T07
and T08 :
t 07
t 08
PRE -FLAS HIN G TIME WHEN
THE DOOR IS CLOSED
From 0 to 10 s
Standard value 0.5 s
PRE-FLASHING TIME
WHEN THE DOOR IS OPEN
From 0 to 10 s
Standard value 2 s
1 2
3
4 5 6 7
6 7
10 11