RoHS Compliant START-S12-M, Instruction And Warnings For The Installer

Page: 92 / 177

START-S12 Technical manual
-27-
Group functions “S”
SET
UP DESCRIPTION
VALUES
ACCEPTED
STANDARD MEMO
S 01
Logic of the motor:
1 - Fast reverse
2 - Collective use
3 - Bistable function
4 - Bistable function with automatic reclosing
5 - Fast reversing and “Dead’s man“ function
6 - Collective use and “Dead’s man function
7 - Bistable funciton and “Dead’s man“ function
8 - Bistable function with automatic reclosing
and “Dead’s man“ function
from 1 to 8 1
S 02 Opening-closing cycle when the door is not closed 0 Off - 1 On 0
S 03 Deactivate the input PHOTO A
after intervention of the slow down LSC
0 Deactivated - 1 Activated 0
S 04
Passage Detection 0 Off - 1 On 0
S 05 Signal light in pause time 0 Off - 1 On 0
S 06 Activation TEST in the safeties inputs 0 Off - 1 On 0
S 07 Logic passage detection 0 Off - 1 On 0
S 08 Logic of the Obstacle Detection
1 - Considered as LIMIT SWITCH
2 - Considered as STOP
3 - Reverse motor of 2 sec,
at min.speed
4 - According to the set up of
function L09 and according to
the motor
(not for sliding gates
of safety devices)
2
S 09 Activate the TEST in the input PHOTOCELL 0 Off - 1 On 0
S 10 Activate the TEST in the SAFETY EDGE input 0 Off - 1 On 0
S 11 Activate the TEST in the input STOP 0 Off - 1 On 0
S 12 Activate the fl ashing in the signal light input 0 Off - 1 On 1
S 13
Activate the input LSO 0 Off - 1 On 1
S 14 Activate the input LSC 0 Off - 1 On 1
S 15 Activate STOP input 0 Off - 1 On 1
S 16 Activate the PHOTOCELL by closing 0 Off - 1 On 1
S 17 Activate the input ANTIFOLDING 0 Off - 1 On 1
S 18 Reset of the control unit at factory’s settings
S 19
Polarity of the brake output
0 - deactivated with tension
1 - brake activated with tension
0
S 20 Activated the input SWITCH for opening slowing down 0 Off - 1 On 1
S 21 Activate the input swicht for CLOSING slowing down 0 Off - 1 On 1
S 22 Activate the input for SAFETY EDGE (terminal 20-21) 0 Deactivated - 1 Activated 1