RoHS Compliant START-S12-M, Instruction And Warnings For The Installer

Page: 56 / 177

START-S12-M Technical manual
-23-
7
RESET of the control unit and restore of factory default settings
The control panel allows users to restore parameters to their standard values (see par. 8) also allows you set
up the default factory settings of rapid doors (4.5 m - 3.5 m - 2.5 m) and sliding gates.
WARNINg:
This operation
cancel all settings
!
7.1
Restore factory settings
Checking those paramenter of the parameters (Chapter no.8), yuo can look the set up during the RESET of
the control unit. Select the paragraph S18 as shown.
P1
Access to the functions
-
t
-
P2
2nd press
-
S
-
P1 confirm
S 01
S 18
P2
P1 - OK
Wait 10 seconds, otherwise, if you press
P1 in 10 seconds, this operation will be
cancelled.
P110
for standard values see table at pag no. 27 and following.