RoHS Compliant START-S12-M, Instruction And Warnings For The Installer

Page: 49 / 177

START-S12-M Technical manual
-16-
3.14 SLOW DOWN SWITCh
Common
Switch
for the beginning of the slow down it is possible to connect the switch OPEN and ClOSE. Connect the
switch to terminal board no.
24-25-27 as shown in the pic. The switches are not installed, the slow down can
be programmed with T03 (open) and T04 (close).
OPEN ClOSE
S 20
Switch input when OPENINg
1 - Activated
(Standard)
0 - Deactivated
S 21
Switch input when ClOSINg
1 - Activated
(Standard)
0 - Deactivated
Pay attention when you connect the brake and pay attention of the polarity. Program with S19 according to
the type of brake:
S 19
POlARITY OUTPUT Of ThE BRAKE
0 - brake deactivate with tension
(Standard)
1 - brake activate with tension
3.15 Connection of the brake (FR1-FR2) and internal brake
S 37
You can activate the INTERNAl BRAKE (S37), activating this function, the internal brake is activated for 2
seconds after engine shutdown.
INTERNAlE BRAKE
1 - light decelaration
2 -
3 -
4 - high deceleration
5 - no aceleration, no brake
6 - light braking
7-
8-
9 - high braking
24 25 26 27