Rohde ELS 1000 S, Original Operating Instructions

Page: 75 / 138

74 / 136 - EN -
2. Product description
2.1. General technical characteristics
Property Description Remark
Design Frontloader
Type ELS series
Form of energy Electrical
Equipment Kiln floor with Ergo Load System (ELS)
•
Pull-out kiln floor
•
Can be loaded from 3 sides.
• Comfort Stop (cushioned end positions)
•
Brake function and floor lock
• Adjustable truck seal
•
Low-maintenance roller system
•
Guided electrical cabling using an energy chain
Option eDrive
• Electrically extendable and retractable kiln floor
•
The kiln is equipped with a switch cabinet,
regardless of its power connection and
performance values.
Voltage 3 N PE 400 V AC
Special voltages for all models and all EU networks
possible on request!
Connection
•
CEE 16 A
• CEE 32 A
•
CEE 63 A
•
Permanent connection
Type depends on the version.
Heating elements
Kanthal heating elements in grooved
bricks or on a support rod
Type depends on the version.
Firing chamber
heating
5-sided
Heating elements in the kiln door, floor, back wall
and side walls.
Heating zones
(control system)
1-zone control 3-zone control optionally available
Firing chamber
insulation
3-layered
Controller
TC 304
TC 504
Optionally available with an ST 411, ST 630 or
ST 632 controller.
Thermocouple Type S
Housing
• Torsion-resistant steel construction
• In-frame ventilation made of
stainless steel
•
Stainless steel door frame
Low external temperatures and high corrosion
protection
Kiln door Swing door
•
Sealable and lockable
• Opening angle approx. 180°
Paint colour
•
Turquoise blue RAL 5018
• Light grey RAL 7035
Type depends on the version.
Permissible ambient
temperature
-5°C to +30°C
Relative humidity Less than 80% Non-condensing
Firing chamber
atmosphere
Oxidising
Firing chamber
ventilation
• Air supply slide
•
Exhaust air flap handle
• Both can be controlled from the front of the kiln
using a remote control.
•
Central exhaust air socket
•
Can be optionally controlled automatically by the
control system.
• Exhaust air can optionally be discharged via an
exhaust air hood (exhaust air hood optionally
available).
Table 2: General technical characteristics