Rohde ELS 1000 S, Original Operating Instructions

Page: 104 / 138

103 / 136 - EN -
9. Instructions for use
9.1. Incident during operation
In the event of unusual incidents of any kind, the kiln should be shut down if in doubt.
⇒
After shutting down, keep the kiln closed and allow the kiln to cool down normally.
Unusual incidents could be:
•
strong smoke development.
•
unusual odour development.
• unusual noises.
•
the kiln dwelling too long at high temperatures due to worn heating elements or incorrect operation.
The kiln can be shut down in the following ways:
Model Action Remark
ELS 150-ELS 480
without eDrive
Trip the main circuit breaker Please refer to the relevant section of this manual.
ELS 750 & ELS 1000/
ELS with eDrive
Press the main switch Please refer to the relevant section of this manual.
Table 23: Incident: Shutting down the kiln
Before restarting, the cause of the incident must be determined and investigated.
9.2. Emergency during operation
In the event of emergencies such as a fire in the kiln installation room, the kiln should be shut down immediately.
Step Action Remark
1 Keep the kiln closed after it has been shut down.
2 Keep doors and windows closed.
3 Notify the fire brigade or trigger the fire alarm system.
4 Warn other people in the building.
5 If possible, use a fire extinguisher for initial firefighting.
Protection of yourself and others takes
precedence over firefighting.
6 Exit the building and wait for the fire brigade.
Make sure that other people also leave the
building.
Table 24: Shutting down the kiln in an emergency
The kiln can be shut down in the following ways:
Model Action Remark
ELS 150-ELS 480
without eDrive
Trip the main circuit breaker Please refer to the relevant section of this manual.
ELS 750 & ELS 1000/
ELS with eDrive
Press the main switch Please refer to the relevant section of this manual.
Table 25: Emergency: Shutting down the kiln
Before any restart, the cause of the emergency must be determined and investigated.
⇒
Emergencies such as fire may render the kiln unusable. Contact the local specialist or the manufacturer for this.