Rohde ELS 1000 S, Original Operating Instructions

Page: 121 / 138

120 / 136 - EN -
Step Action Remark
4
Carefully press the piece of wood from the outer edge against the
insulating cord.
Make sure you press evenly and
carefully against the insulating cord
so as not to damage it.
5
Repeat the process all around the kiln door to adjust the insulating
cord evenly.
6
Close and lock the kiln door to check that the insulating cord is
evenly positioned all around.
7
If necessary, repeat the process if the insulating cord does not
seal properly.
Table 32: Adjusting the insulating cord
13.6. Adjusting the door catch
It may be necessary to readjust the door hinges so that the door of the kiln seals optimally.
Step Action Remark
1 Switch off the kiln and let it cool down.
2 Open the kiln door.
3 Loosen the locknut of the bolt on the door catch (kiln door).
Tool:
10 mm spanner
4
Screw in the hexagon bolt on the door catch half a turn to a full
turn. Tool:
10 mm spanner