Rohde ELS 1000 S, Original Operating Instructions

Page: 131 / 138

130 / 136 - EN -
Replacing the fuse:
Step Action Remark
1 Switch off the kiln completely.
Set the main switch on the kiln to the “0/OFF”
position or pull the power plug.
2 Remove the fuse carrier on the rear of the kiln.
3 Turn the fuse holder anti-clockwise so that it
releases from the lock.
Tool:
7 mm slotted screwdriver
Place the tool in the slot in the fuse holder.
4 Remove the fuse carrier with the fuse from the
housing.
5 Insert a new fuse.
⇒ The fuse can be inserted in either
direction.
Fuse type:
Micro-fuse T 2 A
ROHDE item no.: 705080
6 Reinstall the fuse in reverse order. Tool:
7 mm slotted screwdriver
7 Switch on the kiln. Set the main switch on the kiln to the “I/ON”
position or plug in the power plug.
8 Check the function of the kiln. If the kiln still cannot be switched on, contact a
qualified electrician, the local specialist or the
manufacturer.
Table 40: Replacing the fuse