92 / 136 - EN -
6.2.8.
Mounting the bracket for TC 304/TC 504 (only ELS 150-ELS 480 without eDrive)
Figure 8: Mounting the TC 304/TC 504 bracket (ELS 150-ELS 480 without eDrive)
6.2.9.
Mounting the bracket forST 411/ST 630/ST 632 (only ELS 150-ELS 480 without eDrive)
Figure 9: Mounting the ST 411/ST 630/ST 632 bracket (ELS 150-ELS 480 without eDrive)
6.2.10.
Mounting the control unit bracket (only ELS 750 & 1000/ELS with eDrive)
All ELS 750 and ELS 1000 as well as all ELS with eDrive are equipped with a switch cabinet, on the front of which
the
bracket for the control system is mounted.
TC 304/TC 504:
Use the fastening material to mount the bracket of the control unit on the switch cabinet so that the one fastening hole
is at the top and the two holes at the bottom.
ST 411, ST 630 or ST 632:
Use the fastening material to mount the bracket of the control unit on the switch cabinet so that the arrow embossed
on the bracket points upwards.
⇒
The fastening material is included in the scope of delivery of the control unit.
Mount the bracket of the TC 304 or TC 504
control unit with the aid of the fastening material
so that the one mounting hole is at the top and
the two holes at the bottom.
The fastening material is included in the scope of
delivery of the control unit.
Applies to ELS 150-ELS 480 without eDrive.
Mount the bracket for the ST 411, ST 630 or
ST 632 control unit using the fastening
material in such a way that the arrow
embossed on the bracket points upwards.
The fastening material is included in the
scope of delivery of the control unit.
Applies to ELS 150-ELS 480 without eDrive.
This way up
Controller mounting
plate (see the previous
section)
Control unit bracket
Bracket screw
connections (3x)
This way up
Controller mounting
plate (see the previous
section)
Control unit bracket
Bracket screw
connections (2x)
Summary of Contents for ELS 1000 S
Page 136: ...135 136 Notizen Notes ...
Page 137: ...136 136 Notizen Notes ...
Page 138: ...20210521 01 ...
