manualshive.com logo in svg

Rohde & Schwarz ZVB 4, Manual

Share
Download
Rohde & Schwarz ZVB 4 Manual Download Page 78

R&S ZVB 

Board Replacement 

1145.1078.82 3.21 

E-1 

Replacing LCD A70 and the DC/AC Converter

 

(See Chapter 5, Spare Parts List Items 910, 930 and drawings 1145.1290, 1145.1384) 
 
The LCD and the associated DC/AC converter are accommodated on a mounting plate. The connection 
to the front module controller is made with cables which should also be replaced individually. The 
replacement procedure is as follows: 
f 

Opening the instrument and removing the front unit

 

¾

  Turn off the instrument and disconnect from the mains. 

¾

  Remove the 4 screws in the front handles (410), left and right, and take off the front handles. 

¾

  Remove the countersunk screw (390) next to the display and pull off the front cover (300, 303, 306, 

310, 313, 316, 320, 323) forwards.  

¾

  Remove the 2 countersunk screws 610) in the top of the frame and the 2 in the bottom. 

¾

  Remove the countersunk screws (176) (4 ), (177) (6 ), (178) (8). 

 

¾

  Pull out the front unit together with the keyboard and display (600, 601, 602, 603) forwards. 

 

 

 

 

Caution 

The cables to the front module controller are still connected  

 

 

 

¾

  Disconnect the cables to the LCD, the DC/AC illumination converter, the key pad (keyboard), the 

tachogenerator and, if necessary, the network connection to the front module controller. 

Note:

  

When disconnecting cables, be especially careful with the cable to the keyboard. It is a 
foil cable and can only be removed when the locking device on the foil-cable connector 
has been released. 

Place the key-side of the front unit on a clean surface. 

 
 

Removing the DC/AC converter 

 

¾

  Disconnect the cable from the display (910) to the DC/AC converter (930). 

¾

  Disconnect the converter cable (950) to the DC/AC converter (930) 

¾

  Remove the DC/AC converter (930) by undoing the 2 screws (940) 

 

Removing the LCD

 

¾

  Disconnect the display cable  (945) by cutting through the adhesive label(946). 

¾

  Remove the display connector (1020) after you have undone the two screws (1040).  

¾

  Disconnect the display cable (1030) at the display (910). 

¾

  Remove the display (910) after removing the 4 screws (920)  

 

Summary of Contents for ZVB 4





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands