manualshive.com logo in svg

Rohde & Schwarz ZVB 4, Manual

Share
Download
Rohde & Schwarz ZVB 4 Manual Download Page 130

R&S ZVB 

Shipping of Instrument and Ordering of Spare Parts 

1145.1078.82 5.1 

E-1 

5 Documents  

This chapter provides information on the ordering of spare parts and contains the spare parts list and 
the documents for the complete ZVB unit.  
 
 
 

Shipping of Instrument and Ordering of Spare Parts  

Please contact your Rohde & Schwarz support center or our spare parts express service if you need 
service or repair of your equipment or to order spare parts and modules.  

 
The list of the Rohde & Schwarz representatives and the address of our spare parts express service are 
provided at the beginning of this service manual.  

 
We require the following information in order to answer your inquiry fast and correctly and to decide 
whether the warranty still applies for your instrument: 

•

 Instrument 

model 

•

 Stock 

No. 

•

 Serial 

number 

•

 Firmware 

version 

•

  Detailed error description in case of repair  

•

  Contact partner for checkbacks  

 
 

Shipping of Instrument   

When shipping the instrument, be sure to provide sufficient mechanical and antistatic protection:  

¾

  When transporting or shipping the instrument, repack it as originally packed. The two protective caps 

for the front and rear panels prevent the control elements and connectors from being damaged. The 
antistatic packing foil prevents any undesired electrostatic charging from occurring.  

¾

  If you do not use the original packaging, provide enough padding around the instrument to keep it 

from slipping inside the package. Wrap antistatic packing foil around the instrument to protect it from 
electrostatic charging. 
 
 

Shipping of a Module  

When shipping a module, also be sure to provide it with sufficient mechanical and antistatic protection: 

¾

  Ship the module in a sturdy, padded box.  

¾

  Wrap the board in antistatic foil.  

If the packaging is antistatic but not conductive, additional conductive packaging is required. The 
additional packaging is not required if the enclosed packaging is conductive.  
Exception:  

If the module contains a battery, the tight-fitting packaging must always consist of 
antistatic, non-chargeable material to protect the battery from being discharged.  

 

Summary of Contents for ZVB 4





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands