manualshive.com logo in svg

Rohde & Schwarz ZVB 4, Manual

Share
Download
Rohde & Schwarz ZVB 4 Manual Download Page 4

Safety Instructions

095.1000 Sheet 18

10. Ensure that the connections with information

technology equipment comply with IEC950 /
EN60950.

11. Lithium batteries must not be exposed to high

temperatures or fire.
Keep batteries away from children.
If the battery is replaced improperly, there is
danger of explosion. Only replace the battery by
R&S type (see spare part list).
Lithium batteries are suitable for environmen-
tally-friendly disposal or specialized recycling.
Dispose them into appropriate containers, only.
Do not short-circuit the battery.

12. Equipment returned or sent in for repair must be

packed in the original packing or in packing with
electrostatic and mechanical protection.

13.

Electrostatics via  the connectors may dam-
age the equipment. For the safe handling and
operation of the equipment,  appropriate
measures against electrostatics should be im-
plemented.

14. The outside of the instrument is suitably

cleaned using a soft, lint-free dustcloth. Never
use solvents such as thinners, acetone and
similar things, as they may damage the front
panel labeling or plastic parts.

15. Any additional safety instructions given in this

manual are also to be observed.

Summary of Contents for ZVB 4





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands