manualshive.com logo in svg

Rohde & Schwarz ZVB 4, Manual

Share
Download
Rohde & Schwarz ZVB 4 Manual Download Page 71

Board Replacement 

R&S ZVB 

1145.1078.82 3.14 

E-1 

Replacing Front Module Controller A90   

(See Chapter 5, Spare Parts List, Item 580, and drawings 1145.1010, 1145.1290) 

 

The front module controller is located behind the front unit. 

 

Opening the instrument and removing the front unit

 

Turn off the instrument and disconnect from the mains. 

Remove the  4 screws from the front handles (410), left and right, and take off the front handles. 

Remove the countersunk screw (390) next to the display and pull off the front cover (300, 303, 306, 

310, 313, 316, 320, 323) forwards  

¾

  Remove the 2 countersunk screws (610) in the top of the front frame and the 2 in the bottom. 

¾

  Remove the countersunk screws (176) (4 ), (177) (6 ), (178) (8) 

¾

  Pull out the front unit together with the keyboard and display (600, 601, 602, 603) forwards. 

 

 

 

Caution 

The cables to the front module controller are still connected.

 

 

 

 

Disconnect the cables to the LCD, the DC/AC illumination converter, the key pad (keyboard), the 

tachogenerator and, if necessary, the network connection on the front module controller. 

N.B.:

 

When disconnecting cables, be especially careful with the cable to the keyboard. It is a foil 
cable and can only be removed when the locking device on the foil-cable connector is 
released. 

Removing the front module controller 

 

Remove the 10 sems screws (590) in the front module controller and remove the front module controller 

in the following way (see Fig. 3-2): 

Note: 

The insertion force for the front module controller on the motherboard is very large. 
The slot in the bottom of the controller tray is provided to facilitate pushing out the front 
module controller forwards. 

Using a blunt, flat tool, carefully edge the board forwards.

 

 

 

 

Caution 

Do not insert the tool too far into the slot; only apply pressure to the board. 
To ease the board out, apply light pressure to each and every slot. 
Do not bend the board.

 

 

 

 

Fig. 3-2 

Removing the front module controller 

Summary of Contents for ZVB 4





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands