manualshive.com logo in svg

Rohde & Schwarz ZVB 4, Manual

Share
Download
Rohde & Schwarz ZVB 4 Manual Download Page 131

Shipping of Instrument and Ordering of Spare Parts 

R&S ZVB 

1145.1078.82 5.2 

E-1 

Ordering Spare Parts  

To deliver replacement parts promptly and correctly, we need the following information: 

•

  Stock No. (see component lists in this chapter) 

•

 Designation 

•

  Component number according to component list 

•

  Number of pieces 

•

  Instrument type for the replacement part 

•

  Contact person for any questions 

 
The stock numbers necessary for ordering replacement parts and modules as well as power cables can 
be found later in this chapter. 
 
 

Refurbished Modules    

Refurbished modules are an economical alternative to original modules. It should be kept in mind 
that refurbished modules are not new, but are repaired and fully tested parts. They may bear signs of 
use, but they are electrically and mechanically equivalent to new modules. 

To find out which refurbished modules are available, please refer to your Rohde & Schwarz 
representative (or to Central Service at Rohde & Schwarz Munich). 

 
 

Return of Defective Replaced Modules 

Defective modules that are covered by the replacement program and can be repaired can be 
returned within 

3 months

 after delivery of the replaced module. A repurchasing value is credited. 

Excluded are parts that cannot be repaired, e.g. PCBs that are burnt, broken or damaged by repair 
attempts, incomplete modules, or parts that are heavily damaged mechanically. 

The defective parts must be sent back with a 

returned accompanying document 

containing the 

following information: 

 

•

  Stock No., serial number and designation of the removed part 

•

 

Precise

 description of the malfunction 

•

  Stock No., serial number and designation of the instrument the part was removed from 

•

  Date part was removed 

•

  Name of the technician who exchanged the part 

A returned accompanying document is provided with each replacement module. 

 

 

Summary of Contents for ZVB 4





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands