manualshive.com logo in svg

Rohde & Schwarz ZNLE Series, Getting Started

Share
Download
Rohde & Schwarz ZNLE Series Getting Started Download Page 8

Safety and Regulatory Information

R&S

®

ZNLE

8

Getting Started 1323.2873.02 ─ 08

Potential hazard
Read the product documentation to avoid personal injury or product damage.

Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.

Hot surface
Do not touch. Risk of skin burns. Risk of fire.

Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This

protects you against electric shock should an electric problem occur.

1.2

 

Labels on R&S

 

ZNLE

Labels on the casing inform about:

●

Personal safety, see 

"Meaning of safety labels"

 

on page 7

●

Product and environment safety, see 

Table 1-1

●

Identification of the product, see 

Chapter 4.2.9, "Device ID"

, 

on page 37

Table 1-1: Labels regarding R&S

 

ZNLE and environment safety

Labeling in line with EN 50419 for disposal of electrical and electronic equipment after

the product has come to the end of its service life. For more information, see the prod-

uct user manual, chapter "Disposal".

1.3

 

Korea Certification Class A

이

 

기기는

 

업무용

(A

급

) 

전자파

 

적합기기로서

 

판매자

 

또는

 

사용자는

 

이

 

점을

 

주의하

시기

 

바라며

, 

가정외의

 

지역에서

 

사용하는

 

것을

 

목적으로

 

합니다

.

Korea Certification Class A

Summary of Contents for ZNLE Series










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands