manualshive.com logo in svg

Rohde & Schwarz ZNLE Series, Getting Started

Share
Download
Rohde & Schwarz ZNLE Series Getting Started Download Page 29

Instrument Tour

R&S

®

ZNLE

29

Getting Started 1323.2873.02 ─ 08

●

Zooming into a diagram

●

Selecting a new evaluation method

●

Scrolling through a result list or table

●

Saving or printing results and settings

To imitate a right-click by mouse using the touchscreen, for example to open a
context-sensitive menu for a specific item, press the screen for about 1 second.

For details on touchscreen gestures, see 

Chapter 6.4, "Touchscreen Gestures"

,

on page 63.

4.1.2

 

Power Key

The [Power] key is located on the lower left corner of the front panel. It starts up
and shuts down the instrument.

See also 

"Connecting to power"

 

on page 7 and 

Chapter 3.5, "Connecting to

Power"

, 

on page 15.

4.1.3

 

USB

The front panel provides two female USB connectors (USB-A, 2.0 standard) to
connect devices like a keyboard or a mouse. A memory stick can be connected to
store and reload instrument settings and measurement data.

The rear panel provides further USB connectors (standard 3.0), see 

Chap-

ter 4.2.8, "USB"

, 

on page 37.

4.1.4

 

System Keys

System keys set the instrument to a predefined state, change basic settings, and
provide print and display functions.

A detailed description of the corresponding functions is provided in the
R&S

 

ZNLE user manual.

Front Panel View

Summary of Contents for ZNLE Series










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands