Rohde & Schwarz ZNLE Series Getting Started Download Page 10

Page: 10 / 73

Documentation Overview

R&S

ZNLE

Getting Started 1323.2873.02 ─ 08

The service manual is available for registered users on the global
Rohde

Schwarz information system (GLORIS):

https://gloris.rohde-schwarz.com/irj/portal/SearchDetailView?downloadContai-
nerID=454954

2.4

Instrument Security Procedures

Deals with security issues when working with the R&S

ZNLE in secure areas. It is

available for download on the Internet.

2.5

Basic Safety Instructions

Contains safety instructions, operating conditions and further important informa-
tion. The printed document is delivered with the instrument.

2.6

Data Sheets and Brochures

The data sheet contains the technical specifications of the R&S

ZNLE. It also lists

the firmware applications and their order numbers, and optional accessories.

The brochure provides an overview of the instrument and deals with the specific
characteristics.

See

www.rohde-schwarz.com/brochure-datasheet/ZNLE

2.7

Release Notes and Open Source Acknowledg-
ment (OSA)

The release notes list new features, improvements and known issues of the cur-
rent firmware version, and describe the firmware installation.

The open-source acknowledgment document provides verbatim license texts of
the used open source software.

Release Notes and Open Source Acknowledgment (OSA)

Summary of Contents for ZNLE Series










































































Search results

Summary of Contents for ZNLE Series

Reviews:

Brands by name

Popular brands

Rohde & Schwarz ZNLE Series, Getting Started

Search results

Summary of Contents for ZNLE Series

Reviews:

Brands by name

Popular brands