manualshive.com logo in svg

Rohde & Schwarz ZNLE Series, Getting Started

Share
Download
Rohde & Schwarz ZNLE Series Getting Started Download Page 37

Instrument Tour

R&S

®

ZNLE

37

Getting Started 1323.2873.02 ─ 08

twisted-pair category 5 UTP/STP cables in a star configuration (UTP stands for

unshielded twisted pair

, and STP for 

shielded twisted pair

).

For details, see the R&S

 

ZNLE user manual.

4.2.7

 

LAN

The R&S

 

ZNLE is equipped with a network interface and can be connected to an

Ethernet LAN (local area network). The network card can be operated with a 1
GBit Ethernet IEEE 802.3u interface. Thus, a crossover cable is not necessary
(due to Auto-MDI(X) functionality).

The assignment of the RJ-45 connector supports twisted-pair category 5
UTP/STP cables in a star configuration (UTP stands for 

unshielded twisted pair

,

and STP for 

shielded twisted pair

).

For details, see the R&S

 

ZNLE user manual.

4.2.8

 

USB

The rear panel provides two additional female USB (3.0 standard) connectors to
connect devices like a keyboard, a mouse or a memory stick (see also 

Chap-

ter 4.2.8, "USB"

, 

on page 37).

4.2.9

 

Device ID

The unique device identifier is provided as a barcode sticker on the rear panel of
the R&S

 

ZNLE.

It consists of the device order number and a serial number.

Rear Panel View

Summary of Contents for ZNLE Series










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands