Instrument Tour
R&S
®
ZNLE
31
Getting Started 1323.2873.02 ─ 08
Function key
Assigned functions
[Mkr]
Defines and positions absolute and relative measurement mark-
ers (markers and delta markers).
Selects special marker functions
[Mkr->]
Used for search functions of the measurement markers (maxi-
mum/minimum of the trace).
Assigns the marker frequency to the center frequency, and the
marker level to the reference level.
Restricts the search area (Search Limits) and characterizes the
maximum points and minimum points (Peak Excursion).
[Bw Avg Power]
Defines the power of the internal signal sources, selects the IF
bandwidths, and sets up averaging.
[Sweep]
Defines the sweep type and other sweep parameters; controls
sweep execution.
[Trace]
Configures the graphical analysis of measurement results.
[Trig]
Defines how measurement sweeps are triggered.
[Offset Embed]
Contains functions for deembedding/embedding the DUT from/
into physical/virtual (matching) networks placed between the cali-
brated reference plane and the DUT.
[Meas]
Selects the quantities to be measured and displayed.
[Format]
[Config]
Selects the trace format (dB magnitude, Smith, etc.).
[Display Lines]
Configures display lines and limit lines.
[Cal]
[Single]
Provides all functions related to system error calibration.
[Channel]
[Cont]
Creates and deletes channel setups and optimize the measure-
ment process.
4.1.6
Keypad
The keypad is used to enter numeric parameters, including the corresponding
units. It contains the following keys:
Table 4-3: Keys on the keypad
Type of key
Description
Decimal point
Inserts a decimal point "." at the cursor position.
Sign key
Changes the sign of a numeric parameter. For alphanumeric
parameters, inserts a "-" at the cursor position.
Front Panel View
