manualshive.com logo in svg

Rohde & Schwarz ZNLE Series, Getting Started

Share
Download
Rohde & Schwarz ZNLE Series Getting Started Download Page 56

Operating the Instrument

R&S

®

ZNLE

56

Getting Started 1323.2873.02 ─ 08

Diagram footer

For each parameter diagram, a window is displayed with the following information
in the footer:

1

2

3

4

5

1 = Channel
2 = Center frequency
3 = Power level
4 = Measurement bandwidth
5 = Span

6.2

 

Accessing the Functionality

All tasks necessary to operate the instrument can be performed using this user
interface. Apart from instrument specific keys, all other keys that correspond to an
external keyboard (e.g. arrow keys, ENTER key) operate as specified by Micro-
soft.

For most tasks, there are at least 2 alternative methods to perform them:

●

Using the touchscreen

●

Using other elements provided by the front panel, e.g. the keypad, rotary
knob, or arrow and position keys.

The measurement and instrument functions and settings can be accessed by
selecting one of the following elements:

●

System and function keys on the front panel of the instrument

●

Softkeys on the touchscreen

●

Context menus for specific elements on the touchscreen

●

Icons on the tool bar in the touchscreen

●

Displayed setting on the touchscreen

Accessing the Functionality

Summary of Contents for ZNLE Series










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands