Rohde & Schwarz ZNLE Series, Getting Started

Page: 14 / 73

Preparing for Use
R&S
®
ZNLE
14 Getting Started 1323.2873.02 ─ 08
3.4.1 Placing the R&S ZNLE on a Bench Top
To place the product on a bench top
1. Place the product on a stable, flat and level surface. Ensure that the surface
can support the weight of the product. For information on the weight, see the
data sheet.
2. CAUTION! Foldable feet can collapse. See "Setting up the product"
on page 6.
Always fold the feet completely in or out. If they are folded out, do not place
anything on top or underneath.
3. CAUTION! The product can fall over and cause injury. The top surface is too
small for stacking. Never stack another product on top of the product.
As an alternative, you can mount several products in a rack.
4. NOTICE! Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10
cm between the fan openings of the prod-
uct and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radia-
tors or other products.
3.4.2 Mounting the R&S ZNLE in a Rack
To prepare the rack
1. Observe the requirements and instructions in "Setting up the product"
on page 6.
Setting Up the R&S ZNLE