manualshive.com logo in svg

Rohde & Schwarz ZNLE Series, Getting Started

Share
Download
Rohde & Schwarz ZNLE Series Getting Started Download Page 59

Operating the Instrument

R&S

®

ZNLE

59

Getting Started 1323.2873.02 ─ 08

6.2.2

 

Softtools

Softtools display groups of related settings as a tabbed panel. They can be
opened via function keys on the (virtual) front panel, or via context menu items.

Figure 6-1: Scale softtool

The softtools are displayed in the softkey bar of the instrument. The title area of
the softkey bar displays the name of the currently opened softtool.

If you close the softkey bar using its close icon, it is automatically reopened
the next time a function key is pressed. You can change this behavior in the
"User Interface" tab of the "VNA Setup" dialog.

Some controls on the softtool tabs allow you to read and modify settings (e.g.
"Ref Value" in the screenshot above), some perform actions (e.g. "Auto Scale
Trace"), while others open additional dialogs (button label ends with "...").

Accessing the Functionality

Summary of Contents for ZNLE Series










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands