Remote Control Commands
R&S
®
NRPxxT(N)
122
User Manual 1177.6023.02 ─ 08
SYSTem:REBoot
Reboots the sensor.
Usage:
Event
SYSTem:RESTart
Restarts the firmware of the R&S NRPxxT(N).
Usage:
Event
SYSTem:RUTime
<update_time>
Effective only in the NRP legacy mode.
Sets the result update time. That is the maximum rate in which the power sensor can
output measurement results. Relevant only in continuous measurement mode
(
ON).
Parameters:
<update_time>
Range:
0.0 to 10.0
*RST:
0.1
Default unit: Seconds
SYSTem:SERRor?
Queries the next static error, if available.
Static errors, as a rule, prevent the execution of normal measurements.
Errors in SCPI communication are queried using
.
Usage:
Query only
SYSTem:SERRor:LIST:ALL?
Queries all changes in the static error queue that have not been read yet and removes
them from the queue.
Example:
SYST:SERR:LIST:ALL?
Response:
0,"reported at uptime:2942; notice;
auto-averaging exceeded maximum time;
Notification",0,"removed at uptime:2944;
notice; auto-averaging exceeded maximum time;
Notification"
.
Usage:
Query only
Configuring the System
