Rohde & Schwarz NRP T Series, User Manual

Page: 34 / 169

Operating Concepts
R&S
®
NRPxxT(N)
34 User Manual 1177.6023.02 ─ 08
The main dialog of the web user interface opens.
4. Select the "Continuous Average" tab and perform any necessary changes.
5. Press "Measurement > ON" to start the measurement.
For a detailed description of the web user interface, refer to Chapter 6, "Browser-
Based User Interface" , on page 43.
5.3 Remote Control
You can remote control the R&S NRPxxT(N) easily. The change to remote control
occurs "on the fly" and has no influence on the manual operation.
Further information:
●
Chapter 9, "Remote Control Commands" , on page 62
●
Chapter 11, "Remote Control Basics" , on page 131
●
Chapter 11.1, "Remote Control Interfaces and Protocols" , on page 131
●
Chapter 3.6.1, "Computer" , on page 15
5.4 R&S NRPV
The R&S NRPV enables you to measure power in all available measurement modes.
Also, you can use up to four power sensors simultaneously.
The R&S NRPV is provided on your documentation CD-ROM and on the Rohde &
Schwarz website as a separate standalone installation package.
Required equipment
●
R&S NRPxxT(N) power sensor
●
R&S NRP
‑
ZKU cable or an R&S NRP
‑
Z5 sensor hub and an R&S NRP
‑
ZK6 cable
to connect the sensor to the computer
●
Windows computer with installed:
R&S NRPV