manualshive.com logo in svg

Rockwell Automation PowerFlex 750-Series, User Manual

Share
Download
Rockwell Automation PowerFlex 750-Series User Manual Download Page 57

Using the I/O

5-5

 

 

 

PowerFlex 750-Series Drive DeviceNet Option Module User Manual

Publication 750COM-UM002A-EN-P

Example Ladder Logic 
Program Information

The example ladder logic programs in the sections of this chapter are 
intended for and operate PowerFlex 750-Series drives.

Functions of the Example Programs

The example programs enable you to:

•

Receive Logic Status information from the drive.

•

Send a Logic Command to control the drive (for example, start, stop).

•

Send a Reference to the drive and receive Feedback from the drive.

•

Send/receive Datalink data to/from the drive.

Logic Command/Status Words

These examples use the Logic Command DINT and Logic Status DINT 
for PowerFlex 750-Series drives. Refer to 

Appendix D

, 

Logic 

Command/Status Words for PowerFlex 750-Series Drives

 to view 

details.

Summary of Contents for PowerFlex 750-Series

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands