manualshive.com logo in svg

Rockwell Automation PowerFlex 750-Series, User Manual

Share
Download
Rockwell Automation PowerFlex 750-Series User Manual Download Page 42

4-6

Configuring the I/O

 

 

 

PowerFlex 750-Series Drive DeviceNet Option Module User Manual

Publication 750COM-UM002A-EN-P

Figure 4.8

Expanded Browse for Network Screen  

If a message box appears about uploading or downloading 
information, click OK.

4. As the selected DeviceNet path is browsed, RSNetWorx for 

DeviceNet creates a graphical representation of the devices on the 
network (

Figure 4.9

).

Figure 4.9

RSNetWorx for DeviceNet Graph View Screen 

If the icon for the drive (for this example, PowerFlex 755) on the 
network appears as Unrecognized Device, use RSNetWorx for 
DeviceNet to create the PowerFlex 750-Series drive EDS file.

The EDS file for a PowerFlex 750-Series drive differs from EDS 
files for all other PowerFlex 7-Class drives in that the file does not 
contain any drive or peripheral parameters. Therefore, when the 
EDS file is being created for a PowerFlex 750-Series drive, no 
parameters will be uploaded and the “Parameters” tab that normally 
appears on the Drive Properties screen will not appear.

Summary of Contents for PowerFlex 750-Series

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands