Rockwell Automation PowerFlex 700S, User Manual

Page: 95 / 318

Programming and Parameters 3-37
PowerFlex 700S Phase II AC Drive User Manual - Publication 20D-UM006G-EN-P – July 2008
242 Encoder1 PPR
Sets the pulse per revolution rating of the feedback device connected to the Encoder 1 input.
This parameter must be set to one of the values displayed in bold in Table 242A below.
Units:
Default:
Min/Max: PPR
1024
10/20000 RW 16-bit
Integer
245 Spd Fdbk TP Sel
Enter or write a value to select the data displayed in Par 246 [Spd Fdbk TP RPM] and Par 247
[Spd Fdbk TP Data].
Note: Option values 5 - 15 were changed to “Reserved” and option 41 “First Diff” was added
for firmware version 2.04.
Default:
Options: 0 =
0 =
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 =
11 =
12 =
13 =
14 =
15 =
16 =
17 =
18 =
19 =
20 = “Zero”
“Zero”
21 = “E0 EPR”
“Clock Time” 22 = “E0 Edge Mode”
“InactvFbkDev” 23 = “E0 nMax”
“ActiveFbkDev” 24 = “E0 Error”
“MCP Fdbk Dev” 25 = “E0 Qloss pk”
“Reserved” 26 = “E0 Ploss pk”
“Reserved” 27 = “E0 PlevlHist”
“Reserved” 28 = “E1 Edge Time”
“Reserved” 29 = “E1 dEdge”
“Reserved” 30 = “E1 dTime”
“Reserved” 31 = “E1 EPR”
“Reserved” 32 = “E1 Edge Mode”
“Reserved” 33 = “E1 nMax”
“Reserved” 34 = “E1 Error”
“Reserved” 35 = “E1 Qloss pk”
“Reserved” 36 = “E1 Ploss pk”
“MCP PPR” 37 = “E1 PlevlHist”
“MCP 2^n” 38 = “E0 Delta2Err”
“E0 Edge Time” 39 = “E1 Delta2Err”
“E0 dEdge” 40 = “EOB Present”
“E0 dTime” 41 = “First Diff”
246 Spd Fdbk TP RPM
Displays the value selected in Par 245 [Spd Fdbk TP Sel] in RPM. This display should only be
used if the selected value is floating point data.
Units:
Default:
Min/Max:
Scale: RPM
0.0
-/+8.0 pu
Par 4 [Motor NP RPM] = 1.0pu
RO Real
247 Spd Fdbk TP Data
Displays the value selected in Par 245 [Spd Fdbk TP Sel]. This display should only be used if
the selected value is integer data.
Default:
Min/Max: 0
-/+32768 RO 16-bit
Integer
249 Fdbk Option ID
Displays information about the Feedback Option.
•
Bits 15-11 indicate Module ID Number.
•
Bits 10-6 indicate Version Number.
•
Bits 5-3 indicate Revision Number High.
•
Bits 2-0 indicate Revision Number Low.
Hexadecimal 1000 indicates resolver, hexadecimal 2000 indicates old high-resolution board,
and hexadecimal 2040 indicates new high-resolution board.
Options:
250 FB Opt0 Posit
Displays the position feedback (accumulator) from the feedback option card port 0.
Default:
Min/Max: 0
-/+2147483648 RO 32-bit
Integer
No.
Name
Description
Values
Linkab
le
R
ead-Wr
ite
Da
ta
T
ype
Table 242A: PPR Rating Values
n = 2
n
= x mod 75 mod 125 mod 225 mod 375 mod 625 mod1125
0 1 75 125 225 375 625 1125
1 2 150 250 450 750 1250 2250
2 4 300 500 900 1500 2500 4500
3 8 600 1000 1800 3000 5000 9000
4 16 1200 2000 3600 6000 10000 18000
5 32 2400 4000 7200 12000 20000 --
6 64 -- -- -- -- -- --
7 128 -- -- -- -- -- --
8 256 -- -- -- -- -- --
9 512 -- -- -- -- -- --
10 1024 -- -- -- -- -- --
11 2048 -- -- -- -- -- --
12 4096 -- -- -- -- -- --
13 8192 -- -- -- -- -- --
14 16384 -- -- -- -- -- --
N N NNN N N NNN N NNN
Module ID No.
Version No.
Revision No. Low
N NNN
Revision No. High