Rockwell Automation 1756-L71S Quick Start Manual Download Page 76

Page: 76 / 200

Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016

Chapter 3

GuardLogix® Controllers Logic Integration

11. Insert a rung before the GuardIO_AOI rung.

12. Right-click the rung and choose Import Rung.

13. Browse to the ME Faceplate files folder within the Guard I/O and SmartGuard Faceplate Files toolkit directory.

If the toolkit has been loaded onto your personal computer, the hard drive path is



C:\Program Files\RA_Simplification\SafetyGuardLogix\Files\Guard IO and SmartGuard Faceplate Files\



ME Faceplate Files.

14. Select the GuardIO_AOI_Map file and click Import.

15. Click the

ModuleName:I

field.

16. Click the pull-down arrow to browse to your first Guard I/O module.

Summary of Contents for 1756-L71S









































































































































































































Search results

Summary of Contents for 1756-L71S

Reviews:

Rockwell Automation 1756-L71S, Quick Start Manual, Page: 76 / 200

Search results

Summary of Contents for 1756-L71S

Reviews: