Rockwell Automation 1756-L71S Quick Start Manual Download Page 142

Page: 142 / 200

142

Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016

Chapter 4

SmartGuard™ 600 Controllers Logic Integration

4. In the Add New RSLinx Classic Driver dialog box, name the new driver and click OK.

5. In the Configure driver dialog box, type the IP address of your Logix Ethernet module and click OK.

The IP address shown is an example. Yours will be different.

6. Click Close.

7. Select RSWho from the Communication menu.

8. In the RSWho window, expand the Ethernet communication module until your controller is visible.

9. Verify that you can browse to your CompactLogix controller.

10. Minimize the RSLinx application window and return to your RSLogix 5000 project window.

Save and Download Your Program

Follow these steps to save your program and download it to your CompactLogix controller.

1. Save the program by choosing File>Save from the menu bar.

2. Turn the keyswitch on the controller to REM.

3. To define the path to the controller, click Who Active

and select the controller.

4. Click Download.

TIP

If your Logix Ethernet module is already configured, the IP address is displayed on the module.

Summary of Contents for 1756-L71S









































































































































































































Search results

Summary of Contents for 1756-L71S

Reviews:

Rockwell Automation 1756-L71S, Quick Start Manual, Page: 142 / 200

Search results

Summary of Contents for 1756-L71S

Reviews: