Rockwell Automation 1756-L71S Quick Start Manual Download Page 59

Page: 59 / 200

Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016

GuardLogix® Controllers Logic Integration

Chapter 3

8. Click the pull-down arrow to browse to the Guard I/O module or Point I/O Ethernet Adapter and Slot number

of the module to which this input device is connected.

Some analog input device imports include “Ch0” references that must be updated to specific channel for that input.

9. Double-click the Guard I/O module input tag.

10. If the input device has a

ModuleName:O

output tag, select the

ModuleName:O

field.

11. Click the pull-down arrow to browse to the Guard I/O module to which this input device is connected.

12. Double-click the Guard I/O module output tag.

13. Click OK to complete the import.

Summary of Contents for 1756-L71S









































































































































































































Search results

Summary of Contents for 1756-L71S

Reviews:

Rockwell Automation 1756-L71S, Quick Start Manual, Page: 59 / 200

Search results

Summary of Contents for 1756-L71S

Reviews: