Rockwell Automation 1756-L71S Quick Start Manual Download Page 174

Page: 174 / 200

174

Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016

Chapter 6

Safety System Application Guide

Analog Guard I/O Module Faceplate – Online Help Options

Press

on any view to access help information.

Safety Instruction Faceplate Overview

Safety instruction faceplates are used only with GuardLogix controllers.

The faceplate includes these buttons:

• The

Fault

button launches the fault Probable Cause and Recommended Actions views.

• The

Diagnostics

button launches the diagnostic Probable Cause and Recommended Actions views.

To rename the faceplate, click in the title bar, type the new name by using the popup keyboard, and press Enter.

To close the faceplate, click the Close button in the upper right corner of the display.

The GuardLogix Safety Application Instruction Set Safety Reference Manual, publication

1756-RM095

, provides error

code and diagnostic information for safety application instructions.

Title Bar

Summary of Contents for 1756-L71S









































































































































































































Search results

Summary of Contents for 1756-L71S

Reviews:

Rockwell Automation 1756-L71S, Quick Start Manual, Page: 174 / 200

Search results

Summary of Contents for 1756-L71S

Reviews: