3. MOUNTING
IMS01J02-E4
22
3.3 Mounting the Mother Block
The mother block can be mounted to a panel or DIN rail.
Mount the H-PCP-J module on the left side of the control unit
.
Panel mounting directions
1.
Refer to both the panel mounting dimensions below and the external dimensions in previous
section when selecting the location.
4-M3
24
77
H-PCP-J module
Dimensions for multiple
module mounting
(Unit: mm)
24
77
24
24
2.
Remove the module from the mother block. For details of removing the module,
see
3.5 Removing the Module
Mainframe (P. 24)
.
3.
Connect the mother blocks together before tightening the screws on the panel.
(Customer must provide the set screws)
M3
10
Mother block
Recommended tightening torque:
0.3 N
m (3 kgf
cm)
When the mother block is mounted on the
panel, 50 mm or more space is required at the
top and bottom of the mother block to attach
the module mainframe.
