6. RKC COMMUNICATION
IMS01J02-EE4
84
Continued from the previous page.
Name
Iden-
tifier
Digits
Attri-
bute
Struc-
ture
Data range
Factory
set
value
Alarm 1 action at input
error
[H-TIO-
, H-CIO-A,
H-SIO-A]
OA
1 R/W
U 0: Normal alarm action
1: Forced alarm ON when
temperature measured
value exceeds abnormal
input trigger input.
0
Alarm 2 action at input
error
[H-TIO-
, H-CIO-A,
H-SIO-A]
OB
1 R/W
U 0: Normal alarm action
1: Forced alarm ON when
temperature measured
value exceeds abnormal
input trigger input.
0
Number of alarm delay
times
[H-TIO-
, H-CIO-A,
H-SIO-A]
DF
6
R/W
U
0 to 255 times
Sets the number of sampling
period counting times until
the alarm is turned ON after
temperature measured value
enters the alarm region.
0
Module initialization *
[H-PCP-J]
CL
1 R/W
U 0: Normal state (Initialization
is not executed)
1: Initialize only the new
module (Only modules
which are not recognized
by the H-PCP-J module
are initialized)
2: Initialize all module
Only 1 or 2 can be used in
the selecting and the value
will automatically return to 0
after the selection of 1 or 2.
0
* Initialize method for changing the module composition
To change module configuration, use the following procedures:
When a module is added to the control unit ................................... Initialize only the new module
When a module is deleted from the control unit ............................ Initialize only the new module
When the module is replaced with a different model ..................... Initialize only the new module
When a module is inserted (added) between the modules
in the control unit ........................................................................... Initialize all modules
To change the arrangement of the modules in the control unit ...... Initialize all modules
When “Initialize all modules” is performed, the set values of the setting data of all
modules (in the unit) will change (be initialized).
Before performing “Initialize all modules”, be sure to make a record of the set values
(normal setting data and initial setting data) of all modules. After performing
“Initialize all modules”, be sure to check the set values (normal setting data and initial
setting data) of all modules.
Continued on the next page.
