RKC INSTRUMENT SBR-EW180, User Manual

Page: 80 / 234

4-2
IMSBR10-E1
4.2 Key Operations
This section describes basic operations on the panel keys to change various settings. Functions are set in Setting
mode or Basic Setting mode.
Entering Setting Mode
Hold down the
MENU
key for 3 seconds.
The Setting mode display appears. The top and bottom lines are the setup item and comment, respectively.
The section that is blinking in the setup item that you change. In this manual, the section that you change appears
shaded.
The item to be controlled blinks.
Setup item
Comment
Set=Range
Input range and record
The panel keys are set to the functions marked above the keys.
FEED DISP MENU RCD MENU FUNC CH UP
SHIFT ESC/? CHARACTER
1
Exiting from Setting Mode (Returning to Operation Mode)
Hold down the
MENU
key for 3 seconds.
The screen returns to operation mode.
Entering Basic Setting Mode
Basic Setting mode is entered from Setting mode.
Hold down the
MENU
key for 3 seconds to enter Setting mode. Next, hold down both the (
DISP
) key and
the (
FUNC
) key for 3 seconds.
The Basic Setting mode display appears. The top and bottom lines are the setup item and comment, respectively.
The section that is blinking in the setup item that you change. In this manual, the section that you change appears
shaded.
The item to be controlled blinks.
Setup item
Comment
Basic=Alarm
Auxiliary alarm functi
Exiting from Basic Setting Mode (Returning to Operation Mode)
This operation is used to return to Operation mode after changing the settings in Basic Setting mode.
Press the
ESC
key several times to return to the
Basic=
screen.
Press the key or
SHIFT
+ key to select
End
and then press the key. The setup save screen
appears.
Basic=End
Save Settings
Press the key to select
Store
and then press the key. The setting is applied, and the screen returns to
Operation mode. If you select
Abort
and press the key, the setting is discarded, and the screen returns to
Operation mode.
End=Store
Save settings and rest