3-13
IMSBR10-E1
Names of Parts and Run Operations
3
3.7 Printing Measured Values (Manual Printout)
The measured values of all channels are printed.
Procedure
Starting the Manual Printout
1.
Press the
FUNC
key.
2.
Press the
key to select
Print out
and then press the
key.
Func=Print out
3.
Press the
key with
ManualStart
shown on the screen.
Manual printout starts. The screen returns to the data display screen.
Print=Manual Start
Note
• When manual printout is executed, trend recording is suspended. However, the recorder continues the
measurement and alarm detection (in the background).
• When manual printout is complete, trend recording resumes.
• If an alarm occurs during the manual printout, the alarm is printed after the trend recording resumes.
Aborting the Manual Printout
The following procedure is for aborting the manual printout that is in progress.
1.
Press the
FUNC
key.
2.
Press the
key to select
Print out
and then press the
key.
3.
Press the
key with
Manual Stop
shown on the screen.
Manual printout stops. The screen returns to the data display screen.
Print=Manual Stop
* When the key or key is pressed while holding down the
SHIFT
key,
the operation is reversed as when the respective key is pressed by itself.
Summary of Contents for SBR-EW180
Page 1: ...IMSBR10 E1 SBR EW180 Recorder User s Manual...
Page 2: ......
Page 14: ......
Page 233: ...3 2002...
