7-19
IMSBR10-E1
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
7
7.11 Enabling the Moving Average Function
(Dot Model)
This section explains the details of enabling/disabling the moving average function on the dot model.
Basic Setting mode cannot be entered when recording is in progress or when computation is in progress on
models with the computation function (/M1 option).
Procedure
Changing the Settings
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the
and
keys simultaneously for 3 seconds to enter Basic Setting mode.
3.
Press the
key or
SHIFT
+
key to select
Moving_AVE
and then press the
key.
4.
Set each item and press the
key.
Use the
key or
SHIFT
+
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC
key in the middle of the operation, the settings entered up to then are cancelled,
and the display returns to a higher level menu.
5.
When the
Setting complete
screen appears, do either of the following:
To correct the setting, press the
key.
If you are done, press the
ESC
key.
Enable/Disable moving average.
The new setting takes effect.
ESC/?
Move AVE
Setting complete
Basic=Moving_AVE
Moving_AVE=Not
Applying the Changes and Returning to Operation Mode
Press the
key or
SHIFT
+
key to select
End
and then press the
key. Press the
key
to select
Store
and then press the
key. The changes are applied, and the screen returns to Operation
mode. If you select
Abort
and press the
key, the changes are discarded, and the screen returns to
Operation mode. Press the
ESC
key to return to the
Basic=
screen.
Explanation
Moving_AVE
Use: Enables the setting of the number of samples of the moving average in Setting mode.
Not:
The Moving_AVE item does not appear in Setting mode.
<Related Topics>
Setting the moving average function: Section 6.3
Summary of Contents for SBR-EW180
Page 1: ...IMSBR10 E1 SBR EW180 Recorder User s Manual...
Page 2: ......
Page 14: ......
Page 233: ...3 2002...
