background image

7-11

IMSBR10-E1

Setup Operations for Changing/Adding Functions (Basic Setting Mode)

7

Applying the Changes and Returning to Operation Mode

Press the 

 key or 

SHIFT

 + 

 key to select 

End

 and then press the 

 key.  Press the 

 key to

select 

Store

 and then press the 

 key.  The changes are applied, and the screen returns to Operation mode.  If

you select 

Abort

 and press the 

 key, the changes are discarded, and the screen returns to Operation mode.

Press the 

ESC

 key to return to the 

Basic=

 screen.

Explanation

CH/Tag

Channel: Prints the channel number.
Tag: Prints the tag.

Channel (Dot Model)

When On is selected channel No. is printed by the trend recording.

Alarm

On1:

Prints the alarm information when an alarm occurs or releases.

On2:

Prints the alarm information only when an alarm occurs.

Off:

Does not print alarm information.

Pen Color Printout

When On is selected, the recording color of the channel whose scale is printed is printed. This is valid on
channels whose scale printout is turned On.

7.7  Turning Printouts ON/OFF.

Summary of Contents for SBR-EW180











































































































































































































































Reviews: