RKC INSTRUMENT SBR-EW180, User Manual, Page: 76 / 234

3-17
IMSBR10-E1
Names of Parts and Run Operations
3
3.11 Resetting the Report Data of the Periodic
Printout
This operation resets the past report data when the recorder is configured to print the report data (the average, the
minimum, the maximum, or the sum) of the measured values in periodic printout.
Procedure
Resetting the Report Data
1. Press the
FUNC
key.
2. Press the key to select
Periodic
and then press the key.
Func=Periodic
3. Press the key to select
Reset
and then press the key.
The report data is reset, and the calculation of the report data starts again from that point. The screen
returns to the data display screen.
Log data=Reset
* When the key or key is pressed while holding down the SHIFT key,
the operation is reversed as when the respective key is pressed by itself.