1-22
IMSBR10-E1
1.5 Display
Displayed Information
Main Display
The recorder is capable of displaying measured values, alarm information, and so on the VFD (Vacuum
Fluorescent Display). Using normal fonts, 30 characters
∞
2 lines can be displayed. Using large fonts, 20
characters can be displayed.
RECORD KEYLOCK MATH CHARTEND ALARM
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Main display
Status display
There are 22 display types available. Also, different displays can be assigned to the top and bottom sections of
the main display. These display types can be registered to screens 1 to 15 and switched during operation using
the keys.
Status Display
A status display is available at the bottom of the main display. The indicators below turn ON/OFF.
• RECORD
This indicator turns ON when recording is started and turns OFF when stopped.
• ALARM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
The numbers correspond to measurement channel numbers. The indicator turns ON when an alarm occurs
and turns OFF when the alarm is released.
If the alarm indication is set to hold operation, the indicator blinks when an alarm occurs. When alarm ACK
operation is performed, the indicator turns ON or OFF.
• MATH
This indicator turns ON when computation on the computation function (/M1 option) is started and turns OFF
when stopped.
• KEYLOCK
This indicator turns ON when key lock is enabled and turns OFF when disabled.
• CHART END
This indicator turns ON when the remaining amount of chart paper falls to approximately 2 cm on models with
the FAIL/chart end function (/F1 option).
Display Types
The following display types are available.
• Displays that show measured values
Measured values can be displayed numerically or using bar graphs. The channels that are displayed can be
switched automatically at constant intervals.
The bar graph displays 0 to 100% using 181 points.
0%
100%
181 dots
• Displays that show alarms
• Displays that show the date/time and chart speed
• Displays that show the remote control input and alarm output relay statuses
• Displays that show the status
• System display
Different display types can be assigned to the top and bottom sections of the main display.
Summary of Contents for SBR-EW180
Page 1: ...IMSBR10 E1 SBR EW180 Recorder User s Manual...
Page 2: ......
Page 14: ......
Page 233: ...3 2002...
