IMSBR10-E1
6-4
6.4 Setting Recording Zones for Each
Channel (Zone Recording)
This section explains the details of setting the recording zone for each measurement channel.
Procedure
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Press the
key or
SHIFT
+
key to select
Aux
and then press the
key.
3.
Press the
key or
SHIFT
+
key to select
Zone
and then press the
key.
4.
Set each item and press the
key.
Use the
key or
SHIFT
+
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC
key in the middle of the operation, the settings entered up to then are cancelled,
and the display returns to a higher level menu.
5.
When the
Setting complete
screen appears, do either of the following:
Press the
key to set other channels.
If you are done, press the
ESC
key.
6.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Set the channel range.
Set the leftmost value of the
recording zone.
Set the rightmost value of the
recording zone.
The new setting takes effect.
First channel
Last channel
ESC/?
Set=Aux
Aux=Zone
CH=01-01
Left= 0
Right=180
01-01 Channel
Setting complete
Explanation
Zone
The recording zone can be set in the following range.
Leftmost position:
0 mm to 175 mm
Rightmost position:
5 mm to 180 mm
Set a larger value for the rightmost position than the leftmost position.
Set at least 5 mm for the zone width.
Note
If the zone is set to a value less than 40 mm, scale printout of periodic printout cannot be executed.
Summary of Contents for SBR-EW180
Page 1: ...IMSBR10 E1 SBR EW180 Recorder User s Manual...
Page 2: ......
Page 14: ......
Page 233: ...3 2002...
