96
IMR01Y36-E2
9. TROUBLESHOOTING
This section explains probable causes and treatment procedures if any abnormality occurs in the
instrument. For any inquiries, please contact RKC sales office or the agent, to confirm the
specifications of the product.
If it is necessary to replace a device, always strictly observe the warnings below.
Do not separate the mainframe from the terminal base with the power turned on. If so,
instrument failure may result.
When replacing the instrument with a new one, always use the instrument with the
same model code. If the instrument is replaced, it is necessary to reset each data item.
CAUTION
To prevent electric shock or instrument failure, always turn off the system
power before replacing the instrument.
To prevent electric shock or instrument failure, always turn off the power
before mounting or removing the instrument.
To prevent electric shock or instrument failure, do not turn on the power until
all wiring is completed. Make sure that the wiring is correct before applying
power to the instrument.
To prevent electric shock or instrument failure, do not touch the inside of the
instrument.
All wiring must be performed by authorized personnel with electrical
experience in this type of work.
WARNING
!
